Facebook   

(831) 434-93-73

(831) 434-88-14

(831) 434-93-73

(831) 434-88-14

XGM 150

CABINET

X-ray cabinet complies with the strictest international regulations for fully shielded radiation devices. The cabinet is completely self-contained, manufactured in steel with complete lead shielding. The cabinet can be transported by fork-lift. The cabinet does not require any further shielding and can be located safely in any workplace area.

The cabinet is designed with a sliding table for parts loading, one rear service maintenance door and one front window lead glass for verification the inspection area. The table movement is controlled by inverter with ramps up and down. Electronic safety circuits controlled by multifunction controller in compliance with level 4 safety class, no mechanical contacts switch. There is blinking X-ray on warning light with light fail circuit. Laser pointer for better identification of irradiated x-ray beam area. Inside the cabinet a wide angle camera will be installed in order to allow the operator, by an additional monitor on the control console, for better identifying the area to be irradiated.

SIZE
W.1500 x D.5000 x H.2000 mm

MANIPULATOR

The exposure positions are obtained by 5 CNC controlled and 1 by manually axes movement in order to get all required position of the X-ray tube. The part is able to move from loading position to exposing position by a motorized table. 4 independent handling axes are controlled by brushless motors with absolute encoders on board. This equipment does not require home setting of axes. Positioning speed is up to 15 meters/minute.

The axis positioning is obtained by brushless servo motors with can-bus controller and power driver on board; high precision of positioning is obtained with absolute encoder on board.

Axis positioning during the teach-in procedure and the manual operations are possible either using joystick or trough touch screen display. Also X-ray parameters as kV and mA, and exposure time are automatically stored-in by computer. No limit at the number of program allowed with 100 positions each.

X-RAY/TV
The XGM 150 could be equipped with different combinations of generators/tubes, different power are available.

CONTROL CONSOLE

Tilting adjustable ergonomic console fixed with the cabinet. Electrical panel and electronic boards are inside the console, rear easy access for maintenance operations. There are push-button panel with the main functions, joysticks for axes movement, 4 user programmable function keys. Command, programming and diagnostic, X-ray controller and user interface by one touch screen display.

Ethernet port is also available for connection with a local area network (LAN) or to us for remote diagnostic and service. USB pen drive access available.