8 800 505-66-57

(831) 434-93-73

(831) 434-88-14

A.C.R.E 802


X-ray cabinet complies with the strictest international regulations. The cabinet is completely self-contained, manufactured in steel with complete lead shielding. The cabinet can be transported by fork-lift, does not require any further shielding and can be located safely in any workplace area. The cabinet is designed with a motorized rotating door for casting loading, a large maintenance rear door and a lead/glass inspection window. There is safety light curtain on the loading door.


The castings are moved from outside the cabinet to inside inspection position by an automatic carousel with two turntables. This solution allows loading and offloading a casting outside the cabinet by robot or manually during the inspection of the other casting placed on the second turntable. The turntables are 180 degrees rotating. A strong motorized rotating door makes this operation fast and safe. The ACRE 802 allows a fast continuous cycle inspections reducing the idle time (not productive) at 6 seconds.

W.2580 x D.1995 x H.2440 mm


Kg 4100


The inspection positions are obtained by the movement of the complete X-ray system without any C-arm, coordination and alignment between source and detector is controlled by software. This solution allows a significant increase in the speed of handling and positioning. A mechanical magnification axis (zoom) guarantees linear and constant magnification factor. Motorized and programmable two axes anti-blooming shutter. There are 5 independent handling axes (2 additional axes for motorized programmable shutter on X-ray source). Positioning speed increased to 15 meters/min. The machine can accommodate and inspect for casting 400x800 mm, weight 25 kg.

The ACRE 802 could be equipped with different combinations of generators/tubes, different power are available. Image intensifier XRI 420 industrial version, input window 9 inches or amorphous silicon digital flat panel detector, ADC 14/16 bits, resolution 200 µ.


An operator panel with the main functions pushbuttons and joysticks for axes movement is located in an ergonomic air conditioned console. It is also located a 19” VGA monitor for user interface, programming, image processing and diagnostic functions. For the radioscopic image a monochromatic high resolution 17” monitor is provided. A computer installed with BOSELLO BHT IP software controls all functions of the equipment, all axes movements and diagnostics. The inspection programs are made by teach-in software which allows for the storage several programs. X-ray kV and mA variation is also automatically controlled by RS 232 serial line. The personal computer can be connected to the peripheral devices (printers etc.). Ethernet port is also available for connection with a local area network (LAN). Automatic analysis software (VISUAL FARIS) is optionally available.


  • VISUAL FARIS system for automatic analysis and rejection.
  • Control software, statistics analysis and print of production report.